W60.00-1037-12
1 Splash guard, inner fender
2 Bolt
3 Front inner fender
W60.80-1110-12
Illustrated on tilted cab
4 Entrance
5 Entrance mount
6 Mount
7 Locking cable for tool compartment
8 Bolts for entry
W60.80-1111-11
9 Bolts for entry
| Remove/Install | ||
1 | Remove inner fender splash guard (1) | Unscrew bolts (2) and pull inner fender splash guard (1) toward front. | |
2 | Remove front inner fender (3) | ||
3 | Unhook locking cable for tool compartment (7) | ||
4 | Unscrew bolts for entry (8, 9) | ||
5 | Remove mount (6) | ||
6 | Remove entry mount (5) | ||
7 | Remove entry (4) from cab | Remove entry (4) diagonally toward bottom. Installation: Align entry (4) with fender rear section. | |
8 | Install in the reverse order |