Vehicle with code M7J (Guard plate below bumper) |
1 | Nuts |
2 | Steps |
3 | Bolts |
4 | Bolts |
5 | Cover grill |
6 | Cover grill |
7 | Lower center section |
8 | Bracket |
9 | Protective plate |
10 | Bow |
W88.20-1057-06
Vehicle without code M7J (Guard plate below bumper) |
7 | Lower center section |
11 | Retaining clips |
12 | Upper center section |
W88.20-1058-11
12 | Upper center section |
13 | Surrounds |
14 | Bolts |
15 | Bolts |
16 | Bolts |
W88.20-1059-06
Remove lower center section (7) | |||
1 | Open maintenance flap | ||
2 | Remove grille (6) | ||
3 | Fold up step (2) and unscrew bolts (4) | ||
4 | Remove grille (5) | ||
5 | Fold up bracket (10) | Only if bracket (10) is installed. | |
6.1 | Remove guard plate (9) | Vehicles with code M7J (Guard plate below bumper) | |
6.2 | Remove retaining clips (11) | Vehicles without code M7J (Guard plate below bumper) | |
7 | Fold up bracket (8) on license plate and unscrew bolts (3) | Only on vehicles with folding bracket (8) on license plate. | |
8 | Unscrew nuts (1) and remove bumper lower center section (7) | The bumper lower center section (7) is clipped into the front spoiler in the lower area. | |
Remove upper center section (12) | |||
9 | Remove covers (13) | To remove upper center section (12), first remove lower center section (7). | |
10 | Unscrew bolts (14) on left and right sides | ||
11 | Remove bolts (15) | ||
12 | Unscrew bolts (16) on left and right sides | Only if bolts (16) are installed. | |
13 | Expose electrical line on bumper upper center section (12) and remove bumper upper center section (12) | ||
Install upper center section (12) | |||
14 | Fit electrical line and bumper upper center section (12) and install bumper upper center section (12) | ||
15 | Screw in bolts (16) on left and right | Only if bolts (16) are installed. | |
16 | Screw in bolts (15) | ||
17 | Screw in bolts (14) on left and right | ||
18 | Install covers (13) | ||
Install lower center section (7) | |||
19 | Install bumper lower center section (7) and tighten nuts (1) | To install lower center section (7), the upper center section (12) must be installed first. | |
The bumper lower center section (7) is clipped into the front spoiler in the lower area. | |||
20 | Screw in bolts (3) and fold down bracket (8) on license plate | Vehicles with folding bracket (8) on license plate. | |
21.1 | Install retaining clips (11) | Vehicles without code M7J (Guard plate below bumper) | |
21.2 | Install guard plate (9) | Only on vehicles with code M7J (Guard plate below bumper) | |
22 | Fold down bracket (10) | Only if bracket (10) is installed. | |
23 | Install cover grill (5) | ||
24 | Screw in bolts (4) and fold down steps (2) | ||
25 | Install cover grill (6) | ||
26 | Close maintenance flap |