Illustrated on model 613.365
1 Center part of rear bumper
2 Bracket
3 Rear fog lamp cable
4 License plate lamp cable
6 Rear cross member
T88.20-0001-03
T88.20-0002-02
Illustrated on model 613.365
1 Center part of rear bumper
2 Bracket
4 License plate lamp cable
5 Reversing lamp cable
6 Rear cross member
| Removing, installing | ||
1 | Open rear flap | ||
2 | Disconnect electrical connector to reversing lamp | To do this, unscrew the reversing lamp reflector. | |
3 | Pull cable (5) out of reversing lamp housing | ||
4 | Disconnect electrical connector to rear fog lamp | To do this, unscrew the rear fog lamp reflector. | |
5 | Pull cable (3) out of rear fog lamp housing | ||
6 | Disconnect electrical connector to both license plate lamps | ||
7 | Pull cable (4) out of both license plate lamp housings | ||
8 | Release cable (4) from brackets of rear bumper | ||
9 | Unscrew and remove center part (1) of rear bumper from chassis and from rear cross member (6) | ||
10 | Unscrew and remove side parts of rear bumper from chassis | ||
11 | Install in the reverse order |