D88.00-1108-06
1 Bumper
2 Reflector
3 Phillips screws
4 Collar bolt
5 Bumper support
6 Corner pillar mounting
9 Tie strap
10 Electrical connector
A88.20-0001-01
Only with code W73: Rear-end door step
7 Plastic clamp
8 Dowel pin
| Remove/install | ||
1 | Unscrew reflector (2) and collar bolts (4) | Installation Replace micro-encapsulated collar bolt (4) | |
| |||
2 | Unclip bumper brackets (5) below end panel | ||
3.1 | Remove plastic clips (7) | With code W73, rear-end door step. | |
Press locating pin (8) for plastic clip (7) in toward inside | |||
4 | Remove bumper | Installation: The corner parts of the bumper are inserted in the mounts (6) of the corner pillars (not screwed). | |
5 | Pince through cable strap (9) | ||
6 | Separate electrical connector (10) | ||
7 | Install in the reverse order |
Bumper