Shown on left side of vehicle |
1.1 | Fender liner front section |
1.2 | Fender liner rear section |
2 | Expansion rivet |
3 | Nut |
4 | Screw |
P88.10-2318-06
| Remove/install | ||
1 | Raise vehicle. | ||
2 | Unscrew screw/bolts (4). | ||
3 | Remove expansion rivets (2). | The number of expansion rivets (2) can vary. | |
4 | Unscrew nuts (3). | The number of nuts (3) can vary. | |
5 | Pull outer edges of the fender liner front section (1.1) and fender liner rear section (1.2) inward out of the wheel arch lip and remove fender liner front section (1.1) and fender liner rear section (1.2). | ||
6 | Install in the reverse order. |