Model | 257 with engine 264 |
with code 401 (Climatised front seats) | |
except code 228 (Additional warm water heating) | |
Model | 257 with engine 264 |
with code 824 (Add.parts for countries w.low temperatures) | |
except code 228 (Additional warm water heating) | |
Model | 257 with engine 264 |
with code 873 (Left and right driver's seat heating) | |
except code 228 (Additional warm water heating) | |
Model | 257 with engine 264 |
with code 902 (Seat heater Plus for driver and front passenger) | |
except code 228 (Additional warm water heating) | |
Model | 257 with engine 654 |
except code 228 (Additional warm water heating) | |
Model | 257 with engine 656 |
except code 228 (Additional warm water heating) |
1 | Electrical connector |
2 | Positive line |
3 | Floor covering |
4 | Nut |
5 | Ground cable |
6 | Screw |
F32/4 | Vehicle interior prefuse box |
R22/3 | PTC heater booster |
P83.70-5602-06
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Detach ground line of on-board electrical system battery | ||
2 | Remove glove compartment | ||
3 | Disconnect electrical connection (1) at PTC heater booster (R22/3) | ||
4 | Unscrew positive line (2) from vehicle interior prefuse box (F32/4) | Nut, positive line to vehicle interior prefuse box | |
5 | Pull floor covering (3) out from under instrument panel and center console and fold over to one side | Installation: Make sure that the floor covering (3) is correctly seated. | |
6 | Unscrew nut (4) and remove ground line (5) | Ground point / PTC heater booster | |
7 | Remove bolts (6) | ||
8 | Remove PTC heater booster (R22/3) | Installation: Make sure that the PTC heater booster (R22/3) is correctly seated. | |
9 | Install in the reverse order |