ar8350t5090ab

Remove/install air conditioning dehydrator (roof equipment)

ประเภท ar · หัวข้อ 83.50 · เวอร์ชัน 0101 · 2019-06-22

ใช้กับ: Model NMB671.030 with code HKC (Sütrak AC 353 air conditioning without roof heater) except code HKA (Konvekta ACX 602 air conditioning with roof heater)'

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 83 Climate control › 83.50 Rear air-conditioning — ซีรีส์ 671 (รุ่น 030)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — ซีรีส์ 671 (รุ่น 030)

AR83.50-T-5090AB

Remove/install air conditioning dehydrator (roof equipment)

06.06.2019

Model

NMB671.030

with code HKC (Sütrak AC 353 air conditioning without roof heater)

except code HKA (Konvekta ACX 602 air conditioning with roof heater)

Remove/install air conditioning dehydrator (roof equipment)

1

Protective cap

2

Threaded connection

3

Clip

4

Filter drier

T83.50-0042-11

Remove/install

Danger

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

AS65.00-Z-0002-01A

Danger

Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant.

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been drained.

AS83.00-Z-0001-01A

Topical note

Procedure for a damaged or leaky air conditioning system

AH83.30-N-0004-01A

Topical note

Protect air conditioning circuit and components from moisture when carrying out repair work

AH83.30-N-0005-01A

Notes on handling refrigerant R134a

AH83.30-N-0003-01A

1

Fold up left trim of evaporator unit

AR83.50-T-5010AB

2

Unscrew cover cap (1)

3

Close manually operated shutoff valves (screw in)

The manually operated shutoff valves are located under the cover cap (1).

4

Unfasten and detach clamps (3)

5

Unscrew threaded connections (2) from filter drier (4)

Compressor oils (specification 362.0)

BB00.40-P-0362-00A

Installation: Use new sealing rings. Coat sealing rings with compressor oil before installation in accordance with Specifications for Operating Fluids.

6

Detach filter drier (4)

Installation:
Check packaging of filter drier (4) for signs of damage. Dispose of any filter driers (4) with damaged packaging.
The filter drier (4) must be installed immediately after opening the packaging.
Observe flow direction of filter drier (4).

7

Install in the reverse order

8

Drain air conditioning system

Only if the filter drier (4) has been replaced several times on account of the maintenance intervals and this has reduced the amount of refrigerant in the air conditioning circuit.

AR83.30-T-1780AB

9

Fill air conditioning system (liquid)

Only if the filter drier (4) has been replaced several times on account of the maintenance intervals and this has reduced the amount of refrigerant in the air conditioning circuit.

AR83.30-T-1777AB

10

Perform function test

Air conditioning system - function check

AP83.00-T-8352AB

เอกสารที่อ้างถึง