AR83.30-S-6540A | Remove/install condenser | 30.11.09 |
MODEL 638.0 /1 /2 with CODE (H06) Air conditioning
S83.30-2012-06
1 Clips
2 Refrigerant line
3 Refrigerant line
4 Capacitor
5 Screw
| Remove/install | ||
| When working on the refrigerant circuit, seal all openings with suitable caps in order to prevent unnecessary penetration by air humidity and dirt. | ||
1 | Discharge air conditioning system | Installation: Refill air conditioning system and check for proper operation and leaktightness. | |
2 | Remove front end cross member | ||
3 | Remove front grille | ||
4 | Remove bolts (5) | To ease detaching of the refrigerant lines (2, 3). | |
5 | Disconnect refrigerant lines (2, 3) at condenser (4) | | |
Installation: Install new sealing rings, moisten threaded stud and sealing rings using compressor oil. | |||
6 | Unclip clips (1) | ||
7 | Remove condenser (4) | Observe oil refill quantity when replacing condenser (4) | |
8 | Install in the reverse order | ||
9 | Replace fluid reservoir | ||
10 | Check air conditioning for proper operation | Run engine at idling speed for about 4 minutes and check all the component functions which are of relevance for proper operation of the air conditioning system. |
Air conditioning
Number | Designation | Model | |
BA83.30-N-1004-01A | High pressure line from AC compressor/condenser | Nm | 35 |
BA83.30-N-1005-01A | High pressure line from condenser/fluid reservoir | Nm | 17 |
Air conditioning
Number | Designation | Model | Model | ||
BF83.30-N-1003-01A | Compressor oil refill quantity when replacing condenser | cm3 | 20 | 20 | |
Specifications for | Sheet | ||||
Air conditioning