B10/6 Evaporator temperature sensor
P83.30-3541-03
| Remove/install | ||
1 | Switch off the ignition and remove the transmitter key from the EIS control unit | On vehicles with code (889) Keyless Go, press the Keyless Go start/stop button repeatedly until the ignition is switched off. Remove the Keyless Go transmitter card or transmitter key from the vehicle and store beyond the reach of the transmitter (min. 2 m). | |
2 | Remove cover below instrument panel on left | ||
3 | Disconnect electrical connector from evaporator temperature sensor (B10/6) | ||
4 | Pull evaporator temperature sensor (B10/6) out of A/C housing | ||
5 | Install in the reverse order |