Remove/install fluid reservoir

AR83.30-P-6520TX

Remove/install fluid reservoir

15.9.04

 

Remove/install

1

Discharge air conditioning system

 Installation: Evacuate, refill air conditioning system and check for proper operation and tightness.

AR83.30-P-1760TX

2

Disconnect air conditioning evacuation, recycling and charging unit for refrigerant R134a



*WE58.40-Z-1002-22A

3

Remove bottom engine compartment paneling at front

AR61.20-P-1105TX

4

Undo screw (2) from fluid reservoir (1) and remove pressure plate (3)



*BA83.30-P-1008-01H

5

Remove bolts (4)



*BA83.30-P-1009-01H

6

Slide fluid reservoir (1) to one side until the refrigerant lines (5) are exposed and remove from condenser (6)

 The packaging of the new fluid reservoir (1) must not be damaged.
At the latest 20 min. after opening the packaging of the new fluid reservoir (1), it has to be installed and the entire refrigerant circuit sealed, as otherwise the fluid reservoir (1) function can no longer be guaranteed.

7

Seal openings of refrigerant lines (5) using suitable caps

 The openings of the refrigerant lines (5) must be sealed, as otherwise penetrating dirt and moisture can damage the components connected to the refrigerant circuit.

 Installation: Renew sealing rings of refrigerant lines (5) and wet with compressor oil.



*WH58.30-Z-1002-27A

8

Install in the reverse order

Number

Designation

Model 219

BA83.30-P-1008-01H

Screw, high pressure lines to fluid reservoir

Nm

11

BA83.30-P-1009-01H

Screw, fluid reservoir to condenser

Nm

7

Number

Designation

WH58.30-Z-1002-27A

Set of plugs for air conditioning system

140 830 01 27

WE58.40-Z-1002-22A

Air conditioning service station