Remove/install fluid reservoir

AR83.30-P-6520LFA

Remove/install fluid reservoir

02.07.2019

Model

217, 222

with code 1U6 (R744 refrigerant)

Modification notes

08.03.2017

Model 222 with code 1U6 (Refrigerant R744) added

Shown on MODEL 217

1

Left fender liner

4

Refrigerant line

3

Refrigerant line

5

Fluid reservoir

Shown on model 222 with code 582 (Rear air conditioner)

3

Refrigerant line

5

Fluid reservoir

9

Refrigerant line

Shown on MODEL 217

5

Fluid reservoir

7

Nuts

6

Screw

8

Bracket

 Danger

Risk of injury when working on air conditioning systems due to R744 refrigerant escaping under pressure. Risk of suffocation from inhaling R744 refrigerant in high concentrations. Health hazard caused by inhalation of R744 refrigerant

Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.

AS83.00-Z-0008-01A

Topical note

Protect air conditioning circuit and components from moisture when carrying out repair work

AH83.30-N-0005-01A

Notes on handling refrigerant R744

AH83.30-P-0003-03A

 

Remove/install

1

Drain air conditioning system

AR83.30-P-1760LF

2

Remove left front wheel

AR40.10-P-1102A

3

Remove left fender liner (1)

AR88.10-P-1300LF

4

Remove refrigerant line (3)

 Removal:
Do not use any tools to sever the connections and avoid damage (scratches, notches) to the sealing surfaces.
Otherwise, the integrity of the refrigerant circuit can no longer be ensured.

 Installation: Gaskets must be replaced.

 Bolt, refrigerant line to fluid reservoir

*BA83.30-P-1015-01P

 Bolt, connecting point for lines

*BA83.30-P-1009-01P

If damage (scratches, notches) occurs to the sealing surfaces



Replace corresponding component.

5

Use suitable stop plugs to seal openings

 Record plug

*129589009100

6.1

Remove refrigerant line (4)

Model 217
with code 1U6 (R744 refrigerant)
Model 222
with code 1U6 (R744 refrigerant)
except code 582 (Rear air conditioner)

 Removal:
Do not use any tools to sever the connections and avoid damage (scratches, notches) to the sealing surfaces.
Otherwise, the integrity of the refrigerant circuit can no longer be ensured.

 Installation: Gaskets must be replaced.

 Bolt, connecting point for lines

*BA83.30-P-1009-01P

 Bolt, refrigerant line to fluid reservoir

*BA83.30-P-1015-01P

If damage (scratches, notches) occurs to the sealing surfaces



Replace corresponding component.

6.2

Remove refrigerant line (9)

Model 222
with code 1U6 (R744 refrigerant)
with code 582 (Rear air conditioner)

 Removal:
Do not use any tools to sever the connections and avoid damage (scratches, notches) to the sealing surfaces.
Otherwise, the integrity of the refrigerant circuit can no longer be ensured.

 Installation: Gaskets must be replaced.

 Bolt, connecting point for lines

*BA83.30-P-1009-01P

 Bolt, refrigerant line to fluid reservoir

*BA83.30-P-1015-01P

If damage (scratches, notches) occurs to the sealing surfaces



Replace corresponding component.

7

Use suitable stop plugs to seal openings

 Record plug

*129589009100

8

Remove bolt (6)

 Bolt/nut, bracket for refrigerant reservoir to bracket

*BA83.30-P-1013-01P

9

Unfasten nuts (7)

 Bolt/nut, bracket for refrigerant reservoir to bracket

*BA83.30-P-1013-01P

10

Remove holder (8)

11

Lift up and remove fluid reservoir (5) in direction of arrow

12

Install in the reverse order

 Air conditioning

Number

Designation

Model 217
with code 1U6 (R744 refrigerant)

Model 222
with code 1U6 (R744 refrigerant)

BA83.30-P-1009-01P

Bolt, connecting point for lines

M6

Nm

12

12

 Air conditioning

Number

Designation

Model 217
with code 1U6 (R744 refrigerant)

Model 222
with code 1U6 (R744 refrigerant)

BA83.30-P-1013-01P

Bolt/nut, bracket for refrigerant reservoir to bracket

M6

Nm

8

8

 Air conditioning

Number

Designation

Model 217
with code 1U6 (R744 refrigerant)

Model 222
with code 1U6 (R744 refrigerant)

BA83.30-P-1015-01P

Bolt, refrigerant line to fluid reservoir

M6

Nm

12

12