P83.30-4494-09
Shown with code (581) Comfort automatic air conditioning |
2 | Expansion valve | 10 | Bolts | 17 | Bolts | ||
4 | Bolts | 12 | Air conditioning housing top section | A32 | AC housing | ||
5 | Fresh air/recirculated air housing | 14 | Seal | ||||
8 | Air conditioner housing lower section | 15 | Coolant lines |
Shown with code (581) Comfort automatic air conditioning |
1 | Evaporator |
6 | Electrical connectors |
7 | Connector |
8 | Air conditioner housing lower section |
9 | Electrical wiring harness |
11 | Clip |
12 | Air conditioning housing top section |
13 | Hook |
16 | Electrical connector (with code (581) Comfort automatic air conditioning) |
A32 | AC housing |
M2/35 | Rear blend air flap actuator motor (with code (581) Comfort automatic air conditioning) |
P83.30-4495-06
P83.30-4496-07
Shown with code (580) Automatic air conditioning |
1 | Evaporator | 18 | Bracket | M2/7 | Right blending air flap actuator | ||
3 | Refrigerant lines | A32 | AC housing | ||||
14 | Seal | M2/6 | Left blending air flap actuator |
| Remove/install | ||
1 | Remove air conditioner housing (A32) | Remove/install air conditioner housing | |
2 | Remove screws/bolts (17) and detach expansion valve (2) from refrigerant lines (3) | Installation: | |
Replace sealing rings at refrigerant lines (3). | |||
3 | Remove screws/bolts (4) and place fresh air/recirculated air housing (5) to one side with electrical lines connected | ||
4 | Separate electrical connectors (6) | ||
5 | Remove connector (7) from air conditioning housing bottom section (8) | ||
6 | Remove electrical wiring harness (9) from air conditioner housing bottom section (8) | ||
7 | Disconnect electrical connector from left blend air flap actuator motor (M2/6) and electrical connector from right blend air flap actuator motor (M2/7) | ||
8 | Disconnect electrical connector (16) from rear blend air flap actuator motor (M2/35) | MODEL 204, 207, 212, 218 | |
9 | Remove screws/bolts (10) | ||
10 | Remove all clips (11) holding the air conditioner housing bottom section (8) and air conditioner housing top section (12) together | ||
11 | Remove air conditioner housing top section (12) from air conditioner housing bottom section (8) | Carefully lift air conditioning housing top section (12) over hooks (13). | |
12 | Moisten seal (14) in area of coolant lines (15) with lubricant and guide over coolant lines (15) | Lubricant, rubber assembly 1 l | |
13 | Remove evaporator (1) from lower section of air conditioner housing (8) | ||
14 | Detach bracket (18) from refrigerant lines (3) | ||
15 | Detach seal (14) from refrigerant lines (3) | ||
16 | Install in the reverse order |