Flush refrigerant line to high-voltage battery module

AR83.30-P-1785-03A

Flush refrigerant line to high-voltage battery module

MODEL

221.095/195

1

 Attach adapter (1) to high-voltage battery cooling system shutoff valve - high-voltage battery module refrigerant line (G).

2

 Attach adapter (7) to high-voltage battery module - evaporator refrigerant line (H).

3

Remove refrigerant line (G, H) at high-voltage battery module (A100).

4

 Install adapter (5) in place of high-voltage battery module (A100)

5

Connect high-pressure line (HP) of air conditioning service unit (30) with  adapter (7).

6

Connect low-pressure line (LP) of air conditioning service unit (30) with  adapter (1).

7

Start flushing procedure.

 When operating the air conditioning service unit (30), proceed in accordance with the operator's manual from the manufacturer.

8

 Remove adapter (5).