AR83.30-D-6540A | Install/remove condenser | 12.7.10 |
MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (H06) Air conditioning
D83.30-0008-06
1 Capacitor
2 Refrigerant line, refrigerant compressor/condenser
3 Refrigerant line of condenser/fluid reservoir
4 Bolt
| Remove/install | ||
Danger! | Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant. | Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been discharged. | |
1 | Remove front end center section | ||
2 | Discharge air conditioning system | ||
| Protect air conditioning circuit and components from moisture when carrying out repair work | All models fitted with air conditioning | |
3 | Unscrew the refrigerant line from the refrigerant compressor to the condenser (2). | | |
4 | Unscrew the refrigerant line from the condenser to the fluid reservoir (3) | | |
5 | Undo screws (4) and remove the condenser (1) from the radiator | Installation: Top up compressor oil | |
6 | Install in the reverse order | ||
7 | Remove fluid reservoir | After a new condenser is installed, the fluid reservoir must always be replaced. | |
8 | Evacuating air conditioning system, leak test | ||
9.1 | Fill air conditioning system, replenish (gaseous) | ||
9.2 | Fill air conditioning system (liquid) |
Refrigerant lines
Number | Designation | Models | |
BA83.30-N-1001-02A | Refrigerant line of AC compressor/condenser on condenser | Nm | 33 ( 4) |
BA83.30-N-1003-02A | Refrigerant line of condenser/fluid reservoir to condenser | Nm | 17 ( 3) |
Air conditioning