AR83.30-D-5620A | Removing and installing pressure switch on receiver/drier | 6.1.96 |
MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (H06) Air conditioning
D83.30-0005-12
1 Electrical connection leads
2 Pressure switch
3 Sealing ring
4 Receiver/drier
Modification notes
28.3.01 | Value changed from 10Nm...14 to 12Nm | Value in BA83.30-N-1001-03A on |
| Remove/install | ||
Danger! | Risk of explosion from welding or soldering work on closed air conditioning system. Risk of poisoning from inhaling overheated refrigerant vapors. Risk of injury from skin and eye contact with liquid refrigerant. | Do not carry out any welding work on the closed air conditioning system or in the surrounding area. No smoking or open flames. Wear eye protection and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been discharged. | |
1 | Discharge air conditioning system | ||
| Protect air conditioning circuit and components from moisture when carrying out repair work | All models with AC | |
2 | Remove electrical connection leads (1) from pressure switch (2) | ||
3 | Unscrew pressure switch (2) from receiver/drier (4) | Installation: Screw in pressure switch together with new sealing ring (5). | |
4 | Install in the reverse order | ||
5 | Evacuate air conditioning system, carry out leak check | ||
6.1 | Fill and top up air conditioning system (gaseous) | ||
6.2 | Charging air conditioning system (liquid) |
Receiver/drier