AR83.20-W-3750B | Remove/install radial blower | 18.9.97 |
MODEL 375.1 with BODY 375.830
MODEL 375.3 with BODY 375.810
MODEL 375.4 with BODY 375.840
MODEL 944 with BODY 944.899
MODEL 950.5/ 6, 952.5/ 6, 953.6, 954.5 with BODY 940.899
MODEL 970, 972, 974, 975, 976 with BODY 972.899
MODEL 958.0 with BODY 958.860 except CODE (XV0) Global cockpit
MODEL 958.2 with BODY 958.870 except CODE (XV0) Global cockpit
W83.10-1003-01
6 Air duct
W83.20-0063-11
1 Sliding lock
2 Cover
3 Arresting lever
4 Detent
5 Bayonet lock guide
| Remove/install | ||
1 | Switch off ignition | ||
2 | Loosen footwell cover in the right of the driver's footwell | ||
3 | Remove footwell cover on the front passenger side | ||
4.1 | Remove center stowage compartment. | Models 375.1 /3, 950.5 /6, 952.5 /6, 953.6, 954.5, 958.0/2, 970, 972, 974, 975, 976. | |
4.2 | Remove center footwell cover | Models 375.4, 944. | |
5 | Remove air duct (6) for the right footwell ventilation | ||
6 | Unclip cover (2) using screwdriver and pull off with sliding lock (1) | Installation: Push on cover until it locks in position. | |
7 | Separate electrical plug connection at radial fan | ||
8 | Lift arresting lever (3) over catch (4) and rotate radial fan housing in direction of arrow as far as it will go | ||
9 | Pull radial fan out of bayonet lock guide (5) | ||
10 | Install in the reverse order | ||
11 | Check radial fan for correct operation |