1 | Cover |
2 | Bolts |
3 | cover |
4 | cover |
A12b | Heater ventilation operating unit |
W83.20-1120-12
4 | cover |
5 | Mounting clip |
6 | Electrical connector |
7 | Retaining bracket |
8 | Bolts |
A12b | Heater ventilation operating unit |
W83.20-1121-06
| Remove/install | ||
1 | Fold steering column toward rear | ||
2 | Remove cover (1) in direction of arrow | ||
3 | Remove screws/bolts (2) and remove cover (3) toward rear | ||
4 | Unclip cover (4) and fold toward rear | Mounting wedge | |
5 | Unhook electrical line from the mounting clip (5) | ||
6 | Separate electrical connector (6) at the heater ventilation operating unit (A12b) | ||
7 | Fold away retaining bracket (7) from the wires | ||
8 | Unhook wires at the heater ventilation operating unit (A12b) | Mark installation position of the wires. | |
Installation: Note installation position of the wires. | |||
9 | Remove screws/bolts (8) and remove heater ventilation operating unit (A12b) from the cover (4) | ||
10 | Install in the reverse order |
110 589 03 59 00
Mounting wedge