1 | Blower regulator |
2 | Bolts |
3 | Electrical connector |
S83.10-4561-06
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove glove box | ||
2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
3 | Remove screws (2) | ||
4 | Pull the blower controller (1) from the air duct | ||
5 | Disconnect the electrical connection (3) and remove the blower controller (1) | ||
6 | Install in the reverse order | ||
| Check | ||
7 | Test the correct function of the blower controller |