S82.85-4596-09
2 | Instrument panel | 4 | Air duct group | |
3 | Bolts |
S82.85-4597-09
1 | Emergency call system antenna | 6 | Bracket | |
2 | Instrument panel | 7 | Electrical connector | |
5 | Screw |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove instrument panel (2). | ||
2 | Unscrew bolts (3). | ||
3 | Remove air duct group (4). | ||
4 | Remove screw (5) and remove emergency call system antenna (1) with holder (6) far enough to gain access to the electrical connector (7). | ||
5 | Disconnect electrical connector (7) and remove emergency call system antenna (1) with holder (6). | ||
6 | Remove emergency call system antenna (1) from holder (6). | If the emergency call system antenna (1) is replaced. | |
7 | Install in the reverse order | ||
| Check | ||
8 | Check emergency call system for operational readiness using vehicle diagnosis system. | ||
|