D82.60-1103-08
Shown with code EN4 (COMAND with TMC interface) |
1 | Bolts | 2 | Electrical plug | N87/1 | Radio/radio with navigation |
| Notes on carrying out repair work in the vehicle interior | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Connect diagnostic system and perform initial startup of radio/radio with navigation (N87/1) | When the radio/radio with navigation (N87/1) is replaced. | |
| |||
Installation: Transfer temporarily stored data to the radio/radio with navigation (N87/1). | |||
2 | Remove trim on instrument panel | ||
3 | Remove bolts (1) | ||
4 | Pull radio/radio with navigation (N87/1) out of instrument panel | ||
5 | Disconnect electrical plugs (2) on rear of housing of radio/radio with navigation (N87/1) | ||
6 | Install in the reverse order | ||
| Check | ||
7 | Perform function check for the radio/radio with navigation (N87/1) |