AR82.35-P-6975SM | Adjust spray nozzles of windshield washer system | 9.10.02 |
MODELS 450.3/4 (except 450.418) as of 11.9.00
P82.35-2217-07
1 Windshield wiper arms
2 Spray nozzle
A Spray area
B Spray area
C Spray area
3 Connector
M6/1 Wiper motor
| Remove/install | ||
1 | Remove air inlet | ||
| Remove and install air inlet | ||
2 | Position wiper arms (1) upright | Allow wiper motor to start up and switch off the ignition in the upright position of the wiper arms. After completing the adjustment work, the wiper arms automatically move into the final position when the ignition is switched on. | |
3 | Disconnect plug (3) from wiper motor (M6/1) | Pay attention to locking lugs. | |
4 | Adjust the streams of the spray nozzle (2) to the spray areas | No water should enter the vehicle interior when the windshield washer system is operated. | |
5 | Install in the reverse order |