S82.30-4542-08
Shown on model 447.8 with CODE JF1 (Rain sensor) |
1 | Windshield wiper system | 3 | Electrical connector | |
2 | Screw | 4 | Rubber disk |
Danger ! | Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | |
| Remove/install | ||
1 | Remove paneling at center piece in front of windshield | ||
2 | Unscrew bolts (2) | Screw/bolt, wiper linkage to firewall | |
3 | Lift and turn over windshield wiper system (1) | ||
4 | Disconnect electrical connector (3) | ||
5 | Remove windshield wiper system (1) | Installation: Remove any remaining rubber disks (4) from body and attach at windshield wiper system (1). | |
6 | Install in the reverse order | ||
| Check | ||
7 | Perform function check of windshield wiper system (1) |