AR82.30-P-6950T | Check and adjust rear-end door wiper arm | 4.8.10 |
MODEL 168, 202.07 /08 /09 /18 /19, 203.2, 210.2, 211.2
P82.30-2440-01
Shown on model 211.2, wiper system in park position
1 Rear-end door wiper arm
| Check | ||
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities. | Always remove ignition key when working on windshield wiper mechanism. | |
| When working on the raised rear-end door wiper arm (1) make sure that this does not drop onto the rear window, as it will be damaged otherwise | ||
1 | Move rear-end door wiper arm (1) out of park position and move to reversing position | To do so, switch on ignition (circuit 15 or circuit 15R) and switch on rear-end door wiper motor using the rear-end door wiper switch or the combination switch. If the rear-end door wiper arm (1) is in the reversing position, switch off the ignition and switch off the rear-end door wiper switch or the combination switch. | |
2 | Detach wiper blade | See Operator's Manual | |
3 | Measure and note down the angle of incidence for the rear-end door wiper arm (1) relative to the rear window in the reversing position and then in the park position | The test of the angle of incidence for the rear-end door wiper arm (1) in the reversing and park position determines whether the rear-end door wiper arm (1) needs to be adjusted. | |
Angle of incidence of rear-end door wiper arm (1) in reversing position | |||
Angle of incidence of rear-end door wiper arm (1) in park position | |||
| |||
4 | Compare test values with adjustment values, if necessary adjust angle of incidence for rear-end door wiper arm (1) relative to rear window | Angle of incidence of rear-end door wiper arm (1) in reversing position | |
Angle of incidence of rear-end door wiper arm (1) in park position | |||
5.1 | Adjust angle of incidence of rear-end door wiper arm (1) relative to rear window | Only if check values deviate from tolerance range in the reversing or park position | |
Angle of incidence of rear-end door wiper arm (1) in park position | |||
| |||
6 | Mount wiper blade | See Operator's Manual | |
7 | Perform function check of rear-end door wiper system |
Test and adjustment values for rear-end door wiper arm
Number | Designation | Model | Model | ||
BE82.30-P-1001-01F | Angle of incidence for rear-end door wiper arm in reversing position | Left-hand drive vehicle | ° | +1.0 to +2.0 | -1.5 to -4.5 |
Right-hand drive vehicle | ° | -1.0 to -2.0 | +1.5 to +4.5 | ||
BE82.30-P-1002-01F | Angle of incidence for rear-end door wiper arm in park position | Left-hand drive vehicle | ° | +5.0 to +6.0 | +1.5 to +4.5 |
Right-hand drive vehicle | ° | -5.0 to -6.0 | -1.5 to -4.5 | ||
Test and adjustment values for rear-end door wiper arm
Number | Designation | Model | ||
BE82.30-P-1001-01F | Angle of incidence for rear-end door wiper arm in reversing position | Left-hand drive vehicle | ° | -1.0 to -5.0 |
Right-hand drive vehicle | ° | +1.0 to +5.0 | ||
BE82.30-P-1002-01F | Angle of incidence for rear-end door wiper arm in park position | Left-hand drive vehicle | ° | +1.5 to +4.5 |
Right-hand drive vehicle | ° | -1.5 to -4.5 | ||
Test and adjustment values for rear-end door wiper arm
Number | Designation | Model | Model | ||
BE82.30-P-1001-01F | Angle of incidence for rear-end door wiper arm in reversing position | Left-hand drive vehicle | ° | -1.5 to -4.5 | -1.5 to -4.5 |
Right-hand drive vehicle | ° | +1.5 to +4.5 | +1.5 to +4.5 | ||
BE82.30-P-1002-01F | Angle of incidence for rear-end door wiper arm in park position | Left-hand drive vehicle | ° | +1.5 to +4.5 | +1.5 to +4.5 |
Right-hand drive vehicle | ° | -1.5 to -4.5 | -1.5 to -4.5 | ||
Adjustment tool set
211 589 02 21 00