P82.35-2320-05
1 Wiper system
2 Screw
3 Nut
4 Electrical connector
Modification notes
| Remove/Install | ||
Danger! | Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism | Always remove ignition key when working on windshield wiper mechanism. | |
1 | Remove water collector | ||
2 | Remove bolt (2) at wiper system bracket (1) | Do not change the installation position of the wiper system bracket (1) at the partition wall, otherwise the contact pressure of the wiper arms changes and thus the wipe pattern. | |
| |||
3 | Unscrew nut (3) on both sides | | |
4 | Lift wiper system (1) and disconnect electrical connector (4) at wiper motor | ||
5 | Remove wiper system (1) | ||
6 | Install in the reverse order | ||
7 | Carry out function check on wiper system (1) |
Windshield wiper