Remove and install wiper arm

AR82.30-P-6100CW

Remove and install wiper arm

15.03.2016

Model

204, 207, 212, 218

Modification notes

17.04.2014

New picture inserted

Picture numberP82.30-3209-08

17.04.2014

Specialist note inserted

AS 4.2 factual information inserted

Model 204.0/2, 207, 212.0/2, 218, shown on model 204.0

1

Driver-side wiper arm

2

Passenger-side wiper arm

3

Cap

4

Caps

MODEL 204.9

1

Driver-side wiper arm

2

Passenger-side wiper arm

3

Cap

4

Passenger-side wiper arm

 Danger !

Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.

When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m).

AS82.30-Z-0001-01A

 

Remove/install

1

Bring wiper system into park position

2.1

Switch off ignition and remove transmitter key from ignition lock

Model 204, 207, 212, 218
except code 889 (KEYLESS-GO)

2.2

Switch off ignition, remove KEYLESS-GO start/stop button from electronic ignition lock control unit

Model 204, 207, 212, 218
with code 889 (KEYLESS-GO)

5

Remove cap (3), unscrew nut and detach driver-side wiper arm (1)

 Model 204, 207
Installation: Position tip of wiper blade on driver-side wiper arm (1) onto assembly marking (arrow B) in the windshield's silk-screen print.

 Model 212, 218
Installation: Position tip of wiper blade on driver-side wiper arm (1) 60 mm above the water collector.

 Nut to wiper arm

*BA82.30-P-1001-01M

 Puller

*201589143300

 Thrust washer M 10x1.5

*210589046300

6.1

Detach caps (4), unscrew nuts and remove passenger-side wiper arm (2)

Model 204.0/2, 207, 212, 218

 Installation: Position front passenger side wiper blade (2) onto assembly marking in windshield's silk-screen print.

 Nut to wiper arm

*BA82.30-P-1001-01M

 Puller

*201589143300

 Thrust washer M 10x1.5

*210589046300

6.2

Remove cap (3), unscrew nut and remove passenger-side wiper arm (2)

Model 204.9

 Model 204.9 up to 1/31/14
Installation: Position front passenger side wiper blade (2) onto assembly marking (arrow A) in windshield's silk-screen print.

 Model 204.9 as of 2/1/14
Installation: Position front passenger side wiper blade (4) approx. 21 mm (space a) over the assembly marking (arrow A) in the windshield's silk-screen print.

 Nut to wiper arm

*BA82.30-P-1001-01M

 Puller

*201589143300

 Thrust washer M 10x1.5

*210589046300

7

Install in the reverse order

 Windshield wiper

Number

Designation

Model 204

Model 207

BA82.30-P-1001-01M

Nut to wiper arm

Nm

30

30

 Windshield wiper

Number

Designation

Model 212

Model 218

BA82.30-P-1001-01M

Nut to wiper arm

Nm

30

30