Remove/install hardtop dome lamp

AR82.20-S-0020P

Remove/install hardtop dome lamp

04.02.2019

Model

470

with code Y1D (Hardtop)

Model

470

with code Y1E (Hardtop with roof railing)

1

Hardtop dome lamp

3

Bolts

5

Headliner

2

Cover

4

Electrical connector

6

Electrical line

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Open rear pop-out window.

2

Disconnect electrical connection (4).

 To do so, pull down roof lining (5) far enough until electrical connector (4) is accessible.

3

Unclip covers (2).

 Long wedge

*115589035900

4

Remove screw/bolts (3).

5

Remove hardtop dome lamp (1).

 To do so, guide hardtop dome lamp (1) with electric line (6) out of slot (arrow) in roof lining (5).

6

Install in the reverse order.



Check

7

Perform function test on hardtop dome lamp (1).