P82.20-2342-06
Shown on model 203.0
1 Lens
2 Release
N70 Overhead control panel control unit
Modification notes
| Remove/install | ||
1.1 | Transfer basic data from overhead control panel control unit (N70) to STAR DIAGNOSIS | When installing new overhead control panel control unit (N70). Installation: Transfer buffered basic data to new overhead control panel control unit (N70), and for code (414) Tilting/sliding roof, normalize the anti-pinch protection. | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system | |||
2 | Remove transmitter key from electronic ignition switch control unit | ||
3 | Pry off lens (1) from overhead control panel control unit (N70) | Risk of cracks and fracture to headliner and overhead control panel control unit (N70). | |
Mounting wedge | |||
4 | Press overhead control panel control unit (N70) releases (2) | Note direction of arrow | |
5 | Remove overhead control panel control unit (N70) | Installation: Excess pressure and tensile stress on the roof switch will damage the overhead control panel control unit (N70) | |
6 | Disconnect connectors from overhead control panel control unit (N70) | ||
7 | Install in the reverse order | ||
8.1 | Normalize tilting/sliding roof | For vehicles with code (414) Tilting/sliding roof | |
9 | Read fault memory, erase if necessary | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system |
Mounting wedge
110 589 03 59 00
Commercially available tools