Model | 374.5 with body 374.860 |
with code LG1 (Xenon headlamps) | |
Model | 374.6 with body 374.870 |
with code LG1 (Xenon headlamps) | |
Model | 374.6 with body 944.890 |
with code LG1 (Xenon headlamps) | |
Model | 375.3 with body 375.820 |
with code LG1 (Xenon headlamps) | |
Model | 375.4 with body 375.860 |
with code LG1 (Xenon headlamps) | |
Model | 940, 942, 943, 944 with body 944.890 |
with code LG1 (Xenon headlamps) | |
Model | 950.5/6, 952.5/6, 953.6, 954.5 with body 940.890 |
with code LG1 (Xenon headlamps) | |
Model | 958.2 with body 958.870 |
with code LG1 (Xenon headlamps) | |
Model | 958.4 with body 958.880 |
with code LG1 (Xenon headlamps) |
1 | Headlamp unit |
2 | Screw |
3 | Turn signal lamp |
W82.10-1076-11
4 | Screw |
5 | Setting screws |
W82.10-1077-11
6 | Rubber cap |
7 | Xenon ballast |
W82.10-1078-11
7 | Xenon ballast |
8 | Screw |
W82.10-1079-11
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Danger | Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by swallowing of/skin contact with toxic salts and mercury compounds. | Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the danger zone. Ensure sufficient ventilation in the working area. | |
1 | Switch off ignition and exterior lights | ||
2 | Unscrew bolt (2) and remove cover above lamp unit (1) | ||
3 | Remove screw/bolts (4) | ||
4 | Remove turn signal lamp (3) |
| |
5 | Pivot out lamp unit (1) | ||
6 | Remove screws (8) and remove xenon electrical ballast (7) | ||
7 | Install in the reverse order | ||
8 | Perform function test |