Remove/install additional brake lamp on platform rear spoiler

AR82.10-S-5410P

Remove/install additional brake lamp on platform rear spoiler

16.05.2019

Model

470

with code Y1S (Roll bar (sports bar))

Shown except code Y1U (Roller cover) and except code Y1X (Black roller cover, anodized)

1

Side piece for platform rear spoiler

2

Center section for platform rear spoiler

3

Cover

4

Guide sleeves

5

Sealing washers

6

Shims

7

Spring lock washers

8

Bolts

Shown except code Y1U (Roller cover) and except code Y1X (Black roller cover, anodized)

1

Side piece for platform rear spoiler

2

Center section for platform rear spoiler

9

Screw

10

Washer

11

Pilot bushing

12

Pilot bushing

13

Washer

14

Screw

Shown except code Y1U (Roller cover) and except code Y1X (Black roller cover, anodized)

1

Side piece for platform rear spoiler

2

Center section for platform rear spoiler

15

Electrical connector

16

Electrical connector

17

Additional brake lamp

18

Caps

19

Bolts

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Open rear dropside.

2

Open platform roller cover.

Model 470 with code Y1U (Roller cover) Model 470 with code Y1X (Roller cover black, anodized)

3

Remove covers (3).

 To do so, remove screws (8).

 Installation: Observe sequence of spring lock washers (7), washers (6), sealing washers (5) and pilot bushings (4).
Apply thread locking adhesive to screws/bolts (8).
Observe manufacturer's specifications for the use and processing time of thread locking adhesive.

 Bolt, cover on center piece in rear spoiler on platform

*BA60.30-N-1046-01P

Thread locking agent, Loctite 243 (10 ml)

*BR00.45-Z-1133-02A

4

Remove center section of rear spoiler on platform (2) far enough until the electrical connectors (15, 16) are accessible.

 To do so, unscrew bolts (9, 14) and remove with washers (10, 13) and pilot bushings (11, 12).
The electrical connectors (15, 16) are located on the inside of the left side piece of the rear spoiler on the platform (1).

 Installation: Coat bolts (9, 14) with thread locking adhesive.
Observe manufacturer's specifications for the use and processing time of thread locking adhesive.

 Bolt, rear spoiler center section on platform to rear spoiler at front on platform

*BA60.30-N-1045-01P

Thread locking agent, Loctite 243 (10 ml)

*BR00.45-Z-1133-02A

5

Disconnect electrical connector (15) from electrical connector (16).

 To do so, pull electrical connectors (15, 16) out of opening (arrow).

6

Remove center section of rear spoiler on platform (2).


The center section of the rear spoiler on the platform (2) must not protrude beyond a max. 1 mm to the side piece on the rear spoiler on the platform (1) on both sides.
Otherwise, this may lead to increased noise development while driving.

7

Place rear spoiler center section on platform (2) onto suitable base.

8

Unclip covers (18).

9

Remove additional brake lamp (17).

 Proceed by first removing the screws (19).

10

Install in the reverse order.



Check

11

Perform function test on additional brake lamp (17).

 Platform

Number

Designation

Model 470, 471

BA60.30-N-1045-01P

Bolt, rear spoiler center section on platform to rear spoiler at front on platform

Nm

8

 Platform

Number

Designation

Model 470, 471

BA60.30-N-1046-01P

Bolt, cover on center piece in rear spoiler on platform

Nm

6

Repair materials

Number

Designation

Order number

BR00.45-Z-1133-02A

Thread locking agent, Loctite 243 (10 ml)

A 613 989 09 71 09