ar8210s4905a

Removing and installing taillamp unit

ประเภท ar · หัวข้อ 82.10 · เวอร์ชัน 0104 · 1999-01-21

ใช้กับ: MODEL 638.0 /1 /2

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 82 Electrical system, body › 82.10 Exterior lights — ซีรีส์ 638 (รุ่น 0**, 1**, 2**)

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.41 Rear lamp — ซีรีส์ 638 (รุ่น 0**, 1**, 2**)

AR82.10-S-4905A

Removing and installing taillamp unit

22.5.95

MODEL 638.0 /1 /2

Removing and installing taillamp unit

S82.10-1015-06

1 Bulb carrier

2 Stop lamp

3 Side light

4 Turn signal lamp

5 Reverse lamp

6 Fog taillamp

7 Screws

E67 Left rear lamp

E68 Right rear lamp

Removal, installation

1

Switch off driving and parking lights

2

Unscrew screws (7)

3

Remove taillamps (E67, E68)

4

Disconnect connector

5

Remove bulb carrier (1)

6

Remove bulbs

Injury hazard from burning, if bulb has just been switched off!

Do not touch glass section of bulb with bare fingers.

Installation: Ensure that bulb is properly seated.

7

Install in opposite order