S82.10-A000-09
Shown on left front fog lamp (4) |
1 | Bumper | 3 | Electrical connector | |
2 | Screw | 4 | Front fog lamp |
| Remove/install | ||
1 | Loosen left or right front fender liner until the front fog lamp (4) is accessible. | ||
Installation: Fasten left or right front fender liner only after the function test for the front fog lamps (4). | |||
2 | Disconnect electrical connector (3). | ||
3 | Unscrew bolts (2). | ||
4 | Remove front fog lamp (4) from bumper (1). | Installation: Ensure that the front fog lamp (4) is at the correct assembly position (arrow) on the bumper (1). | |
5 | Install in the reverse order | ||
| Check | ||
6 | Perform function test on both front fog lamps (4). | ||
7 | Adjust both front fog lamps (4). |