Remove/install bulbs of headlamp unit

AR82.10-S-1201P

Remove/install bulbs of headlamp unit

26.07.2017

Model

470, 471

with code L12 (Headlamps, halogen)

except code LG7 (LED high-performance headlamps)

Shown on the right lamp unit

1

Cover

3

Socket

2

Covers

4

High beam bulb

Shown on the right lamp unit

5

Socket

6

Low beam bulb

Shown on the right lamp unit

7

Electrical lines

9

Socket

8

Retaining bracket

10

Turn signal light bulb

Shown on the right lamp unit

11

Socket

12

Daytime running lights and standing lights bulb

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 

Remove/install

1

Switch off exterior lighting and turn signal lights

2

Switch off ignition and store transmitter key outside of transmission range (min. 2 m)

3

Remove on-board electrical system battery

When removing bulbs of left lamp unit.

AR54.10-S-0005P

4

Remove the battery carrier

When removing bulbs of left lamp unit.

 Screw, battery carrier to body

*BA54.10-N-1007-01P

5

Remove cover (1)

When removing bulbs of right lamp unit.

 Clip remover

*452589016300

6

Remove covers (2)

7

Rotate socket (3) approx. 30° counterclockwise and remove from lamp unit

8

Pull high beam bulb (4) out of socket (3)


Do not touch the glass bulb with bare fingers, but instead use a clean, soft cloth.
Otherwise damage may occur to the high beam bulb during operation (4).

9

Rotate socket (5) approx. 30° counterclockwise and remove from lamp unit

10

Pull low beam bulb (6) out of socket (5)


Do not touch the glass bulb with bare fingers, but instead use a clean, soft cloth.
Otherwise damage may occur to the low beam bulb during operation (6).

11

Push electric lines (7) forward beneath retaining bracket (8) and out

12

Unlock socket (9) (arrow A) and take out lamp unit

13

Pull turn signal light bulb (10) out of socket (9)


Do not touch the glass bulb with bare fingers, but instead use a clean, soft cloth.
Otherwise damage may occur to the turn signal light bulb during operation (10).

14

Unlock socket (11) (arrow B) and take out lamp unit

15

Take daytime running lights and standing lights bulb (12) out of socket (11)


Do not touch the glass bulb with bare fingers, but instead use a clean, soft cloth.
Otherwise damage may occur to the daytime running lights and standing lights bulb during operation (12).

16

Install in the reverse order



Check

17

Perform function check of exterior lighting



AP82.10-S-8251P

 Battery, voltage supply

Number

Designation

Model 471

Model 470

BA54.10-N-1007-01P

Screw, battery carrier to body

Nm

19

19