P82.10-8160-09
1 | Roof spoiler | 4 | Electrical connector | |
2 | Water hose | 5 | Nut | |
3 | Electrical connector | E21 | Center stop lamp |
P82.10-7674-09
6 | Screw | 8 | Catch | |
7 | Electrical connector | E21 | Center stop lamp |
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Notes on sensor system for trunk lid opening/closing | Model 213.2 | |
| Remove/install | ||
1 | Remove upper liftgate paneling | ||
2 | Remove water hose (2) from spray nozzle | Installation: Ensure correct seating of water hose (2) for rear window washer system. | |
3 | Disconnect electrical connector (3) | ||
4 | Disconnect electrical connection (4) | ||
5 | Unscrew nuts (5) and remove the roof spoiler (1) | ||
6 | Remove bolts (6) | ||
7 | Detach electrical plug (7) from the roof spoiler (1) | ||
8 | Push catch (8) on the roof spoiler (1) downwards using a suitable tool | ||
9 | Remove center brake lamp (E21) from the roof spoiler (1) | | |
10 | Install in the reverse order | ||
| Check | ||
11 | Perform function check of center brake lamp (E21) |