P82.10-0784-06
Illustrated on model 168 up to 28.2.01
1 Screw
2 Bumper
3 Turn signal lamp electrical connector
4 Illumination electrical connector
5 Pneumatic line
6 Bolts
7 Housing cover
E1 Left headlamp unit
E2 Right headlamp unit
| Removing, installing | ||
1 | Unscrew screws (1) and pull bumper (2) toward front out of lateral guide (arrow) | Pull bumper out of lateral guide only on corresponding side of lamp unit (E1) or (E2) to be removed | |
2 | Disconnect electrical connectors (3, 4) | Unhook windshield washer reservoir from left lamp unit | |
3 | Carefully remove pneumatic line (5) from headlamp range control | Danger of breaking insert profiles | |
4 | Unscrew screws (6) | For this purpose unhook lug from outer screw | |
5 | Remove housing cover (7) from fog lamp | ||
6 | Remove lamp unit (E1, E2) toward front | Move lamp unit out of lateral guide (arrows) | |
7 | Install in the reverse order | ||
| Inspecting | ||
8 | Check and correct headlamp adjustment |