AR82.10-P-0004TX | Remove/install front axle level sensors | 23.12.04 |
MODELS 219.3 with CODE (615) Bi-xenon headlamp unit with integrated curve illumination
P82.10-4034-07
1 Nut
2 Pin
3 Nut
B22/2 Front axle level sensor
4 Electrical connector
5 Bracket
6 Bolts
| Remove/Install | ||
1 | Raise vehicle with lifting platform | ||
2 | Counterhold pin (2) and unscrew nut (1) | Replace self-locking nut (1). | |
3 | Unscrew nut (3) and concealed nut (arrow) | Replace self-locking nut (3) and self-locking concealed nut (arrow). | |
4 | Disconnect electrical connector (4) and remove front axle level sensor (B22/2) | ||
5.1 | Unscrew bolts (6) and remove | Only when replacing the front axle level sensor (B22/2). | |
Replace self-locking bolts (6). | |||
6 | Install in the reverse order | ||
7 | Check the adjustment of the left front lamp unit and the right front lamp unit, correct if necessary. | ||
| Check and correct headlamp setting |