AR77.75-W-0009A | Remove, install insect screen on pop-up roof | 7.7.10 |
MODEL 375.1, 958.0, 970, 972, 974, 975, 976 with CODE (DS8) Power glass tilting roof with sunroof
MODEL 374.5 /6, 375.3 /4, 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5, 958.2 /4 with CODE (DS8) Power glass tilting roof, incl. sun screen
W77.75-1004-11
1 Guide rail
2 Cover frame
3 Insect screen
4 Roller sun blind
W77.75-1005-11
2 Cover frame
3 Insect screen
4 Roller sun blind
5 Shaft (for insect screen)
6 Shaft (for roller sun blind)
7 Spacer
8 Bearing bridge
9 Bearing bridge
| Removing | ||
1 | Remove cover frame (2) from pop-up roof | ||
2 | Roll up roller sun blind and insect screen (4, 3) | ||
3 | Remove guide rail (1) | ||
4 | Remove bearing bridge (9) | Simultaneously relieve tension on pre-tensioned shafts (6, 5) of roller sun blind and insect screen (4, 3) | |
5 | Remove both spacers (7) | ||
6 | Remove insect screen (3) | ||
| Install | ||
7 | Install insect screen (3) in cover frame (2) | Guide insect screen (3) over roller sun blind (4). | |
8 | Install both spacers (7) | ||
9 | Roll up roller sun blind and insect screen (4, 3) until both ends make contact to passenger on cover frame (2) | ||
10 | Pretension insect screen (3) | For this purpose turn shaft (5) approx. 15 to 20 turns and hold | |
11 | Pretension roller sun blind (4) | For this purpose turn shaft (6) approx. 15 to 20 turns and hold | |
12 | Remove bearing bridge (9) | Simultaneously guide pretensioned shafts (5 , 6) on roller sun blind and insect screen (4, 3) into bearing bridge (9) | |
13 | Install guide rails (1) | If necessary align roller sun blind and insect screen (4, 3). | |
14 | Check whether roller sun blind and insect screen (4, 3) function properly | ||
15 | Install cover frame (2) on pop-up roof |