AR77.75-W-0005A | Remove, install pop-up roof cover | 7.7.10 |
MODEL 375.1, 958.0, 970, 972, 974, 975, 976 with CODE (DS3) Pop-up roof, electric
MODEL 375.1, 958.0, 970, 972, 974, 975, 976 with CODE (DS8) Power glass tilting roof with sunroof
MODEL 374.5 /6, 375.3 /4, 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5, 958.2 /4 with CODE (DS3) Electric pop-up roof
MODEL 374.5 /6, 375.3 /4, 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5, 958.2 /4 with CODE (DS8) Power glass tilting roof, incl. sun screen
W77.75-1003-11
1 Lever (from pop-up roof motor)
2 Pop-up roof cover
3 Tapping plate
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Open pop-up roof | ||
2 | Remove lever (1) from threaded plate (3) | Installation: Counterhold threaded plate (3). | |
3 | Remove pop-up roof cover (2) | Installation: Coat hinges with lubricant. | |
4 | Clean pop-up roof cover (2) | Only if pop-up roof cover (2I is reused. | |
5 | Clean seal for pop-up roof cover (2) and check for damage | If seal is damaged: | |
Replace seal for pop-up roof cover (2). | |||
6 | Install in the reverse order |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1032-06A | Antifriction agent | A 000 989 08 60 |