AR77.75-W-0003A | Remove, install pop-up roof motor | 7.7.10 |
MODEL 375.1, 958.0, 970, 972, 974, 975, 976 with CODE (DS3) Pop-up roof, electric
MODEL 375.1, 958.0, 970, 972, 974, 975, 976 with CODE (DS8) Power glass tilting roof with sunroof
MODEL 374.5 /6, 375.3 /4, 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5, 958.2 /4 with CODE (DS3) Electric pop-up roof
MODEL 374.5 /6, 375.3 /4, 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5, 958.2 /4 with CODE (DS8) Power glass tilting roof, incl. sun screen
W77.75-1002-02
1 Electrical connector
2 Lever
3 Bolt (for emergency opening)
4 Fuse
5 Bolts
M20 Tilting roof motor
W77.75-1001-02
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Remove center curtain rail | ||
2 | Remove cover frame form pop-up roof | ||
3 | Remove retainer (4) | ||
4 | Electrically open pop-up roof | If the pop-up roof cannot be opened electrically:: | |
Open pop-up roof mechanically with aid of bolt (3) on pop-up roof motor (M20). | |||
5 | Support pop-up roof | ||
6 | Switch off ignition | ||
7 | Disconnect electrical connector (1) | ||
8 | Remove bolts (5) | ||
9 | Remove pop-up roof motor (M20) | For this purpose remove support, manually lower pop-up roof and pull pop-up roof motor (M20) out of lever (2). | |
Installation: When replacing pop-up roof motor (M20), move lever to "Pop-up roof opened" position. | |||
10 | Install in the reverse order | ||
11 | Check pop-up roof function |