ar7737p3560g

Remove/install hydraulic cylinder on front catch

ประเภท ar · หัวข้อ 77.37 · เวอร์ชัน 0200 · 2003-02-07

ใช้กับ: MODEL 170

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 77 Sliding roof, soft top, top attachments › 77.37 Vario roof, soft top - hydraulic system — ซีรีส์ 170

EinPAS 38 Roof system › 38.20 Soft top/coupé roof/vario roof › 38.20.40 Soft top drive — ซีรีส์ 170

AR77.37-P-3560G

Remove/install hydraulic cylinder on front catch

23.2.96

MODEL 170

Remove/install hydraulic cylinder on front catch

P77.37-0397-06

1 Front catch hydraulic cylinder

2 Circlip

3 Pin

4 Lock panel

Modification notes

14.1.03

Check oil level in hydraulic unit, correct, added

Step 10

Remove/Install

Danger!

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

Keep body parts and limbs well clear of moving parts.

AS00.00-Z-0009-01A

Danger!

Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning from swallowing hydraulic fluid.

Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and eye protection.

AS00.00-Z-0013-01A

Danger!

Risk of injury from pinching or squeezing when working on partially open Vario roof (stop mode) or in its closing area as a result of the Vario roof suddenly collapsing

Secure Vario roof with a suitable special tool.

AS77.50-Z-0001-01A

Notes for carrying out assembly operations on Vario roof

AH77.30-P-0002-01R

1

Remove catch from Vario roof

AR77.33-P-3400G

2

Remove right C-pillar paneling from Vario roof

AR68.30-P-4500G

3

Remove right side paneling in trunk

AR68.30-P-4800G

4

Remove cover above right B-pillar

5

Expose hydraulic lines no. 31 and no. 33 on Vario roof and in trunk up to soft top actuation hydraulic unit

Mark installation position of hydraulic lines and electrical leads tied to hydraulic lines:

Installation: Observe markings of installation position.

6

Remove retaining rings (2) and bolts (3) from lock panel (4)

7

Separate hydraulic lines no. 31 and no. 33 from soft top actuation hydraulic unit

When separating hold a rag around the hydraulic line connections to prevent hydraulic oil from running out.Immediately plug connections on the hydraulic lines and on the soft top actuation hydraulic unit with appropriate plug

Pressure is still present in hydraulic lines when Vario roof has been moved with the roof switch and the ignition is not switched off

*129589009100

Installation: Observe line coding of hydraulic lines when connecting

8

Remove front catch hydraulic cylinder (1) with hydraulic lines from Vario roof

9

Install in the reverse order

10

Check oil level of soft top actuation hydraulic unit, correct

AR77.37-P-3501G

Remove/install hydraulic cylinder on front catch

Set of plugs

129 589 00 91 00

เอกสารที่อ้างถึง