Prepare front fixed element of panoramic sliding sunroof for installation

AR77.21-P-0803-02MFB

Prepare front fixed element of panoramic sliding sunroof for installation

Model

247

with code 413 (Panoramic sliding sunroof/glass roof)

1

Check front stationary element (1) for damage. Replace if front stationary element (1) or seals are damaged.

2

Install cup suction tool on outer surface of front stationary element (1) and lay front stationary element (1) down on suitable surface with inside pointing upward.

3

Cut adhesive beads (3) down to a height of approx. 1 to 2 mm using scraper. If front stationary element (1) is reused.

4

Completely cut back residues of spacers (2, 4 and 5) and adhesive bead (3) present in this area. If front stationary element (1) is reused.

5

Remove cutting residues using a wet and dry vacuum cleaner. If front stationary element (1) is reused.

6

Apply cleaner to bonding surfaces on inside of front fixed element (1) using part of cleaning cloth and wipe dry with other part of cleaning cloth.

 The cleaner and the cleaning cloth are included in the repair kit.
Allow cleaner to dry completely.

7

Uniformly apply primer uniformly to bonding surfaces on inside of front stationary element (1).

 Observe processing notes for primer.
Otherwise the adhesive force of the adhesive material starts to decrease when installing window.

 When reusing front stationary element (1), apply primer only to bonding surfaces without residual adhesive material.
The primer is included in the repair kit.