Install rear fixed element of panoramic sliding sunroof

AR77.21-P-0802-05MFB

Install rear fixed element of panoramic sliding sunroof

Topical note

Notes on removal/installation of bonded elements of panoramic roof

AH77.21-P-0001-01A

Model

247

with code 413 (Panoramic sliding sunroof/glass roof)

1

Position rear fixed element (1), carefully place on adhesive bead and lightly press on.

 Helper required.

2

 Insert feeler gauges adjusted to the gap dimension (B) determined before removal between the rear fixed element (1) and the rear roof paneling (3) and align rear fixed element (1).

3

Center rear fixed element (1) between side roof paneling.

4

Position drip rails (2) and check lateral alignment of rear fixed element (1); correct if necessary.

 Only remove drip rails (2) after the adhesive material has cured.

5

Place suitable weights on rear fixed element (1) during curing time of adhesive material.

 Use flat weights, e. g. sandbags.
The rear fixed element (1) may otherwise be damaged.

6

Carefully remove cup suction tool.

7

Remove drip rails (2).