1 | Electrical connector |
2 | Bolts |
M12/5 | Panoramic sliding roof roller sun blind drive unit |
P77.21-2514-04
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove headliner. | ||
2 | Release electrical connector(1) and disconnect. | ||
3 | Remove screws (2) and remove panoramic sliding sunroof roller sunblind drive unit (M12/5). | ||
4 | Install in the reverse order. | ||
Normalizing | |||
5 | Normalize roller sunblind with vehicle diagnosis system and perform teach-in process for automatic reversing function. | ||
|