Remove/install front passenger door power window switch

AR72.29-P-0102LW

Remove/install front passenger door power window switch

25.10.2016

Model

190

Model

205

Model

238

Shown on model 205.0

1

Armrest

2

Adhesive foil

3

Passenger door

4

Electrical connector

5

Locks

6

Cover

S21/2

Passenger-side power window switch



Remove

1

Attach adhesive foil (2) on armrest (1) of passenger door (3)


Attach adhesive (2) on armrest (1) in contact area of tool flush to cover (6) of passenger side power window switch (S212).
Otherwise the armrest (1) can be damaged when removing the passenger side power window switch (S21/2).

2

Insert unclipping device on rear lateral side at an angle of 45° to passenger side power window switch (S21/2) and position

 The  clip remover must be held at an angle of approx. 45° to the surface of the armrest (1).

 Clip remover

*452589016300

3

Turn unclipping device 45° so that it is located at an angle of 90° to passenger side power window switch (S21/2)

 Clip remover

*452589016300

4

Remove passenger side power window switch (S21/2) with cover (6) from armrest (1)

 Clip remover

*452589016300

5

Disconnect electrical connector (4)

6

Unlock catches (5) and remove passenger side power window switch (S21/2) from cover (6)

Only when replacing passenger side power window switch (S21/2).



Install

7

Insert passenger side power window switch (S21/2) into cover (6) and lock

If the passenger side power window switch (S21/2) has been replaced.

8

Connect electrical connection(4)

9

Insert passenger side power window switch (S21/2) with cover (6) into armrest (1) and install

10

Attach adhesive foil (2) on armrest (1) of passenger door (3)

11

Carry out function check