AR72.20-D-1901A | Remove/install rear-end door | 25.11.10 |
MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.06 /36 /46 /66 except CODE (W90) No rear-end doors
MODEL 690.63/ 64
D72.20-0002-09
Illustration: Flat roof version
5 Right strap
6 Left strap
7 Paint protective sheet
8 Door stop
1 Left rear-end door
2 Rear-end door, right door wing
3 Cylindrical torx screw
4 Torx screw
Modification notes
| Remove/install | ||
1 | Check door check (8) on both door hinges. | and replace if necessary | |
2 | Release strap (5) | ||
3 | Inspect paint protective sheets (7) for damage | and replace if necessary | |
4 | Remove screws (3, 4) attaching door hinges | | |
5 | Lift out rear door | The left rear-end door is removed in the same way. | |
If the door is replaced, the seams must be sealed all around before painting | |||
Installation: Clean door hinge contact surfaces before installing rear-end door and apply primer. | |||
6 | Install in the reverse order | ||
7 | Inspect alignment of rear door | Adjust if necessary |
Rear-end door