Test values for sliding doors
Number | Designation | Model | |
BE72.16-N-1001-01B | Gap width of sliding door all-round | mm | 101 |
BE72.16-N-1002-01B | Ridge offset of sliding door to side wall paneling | mm | 02 |
Sliding doors
Number | Designation | Model 667, 668, 670 | |
BA72.16-N-1001-01C | Screw, lock striker to C-pillar | Nm | 25 |
BA72.16-N-1002-01C | Bolt, upper door guide on body | Nm | 20 |
BA72.16-N-1003-01C | Bolt, guide rail to body | Nm | 8 |
BA72.16-N-1004-01C | Nut, lower carrier on sliding door | Nm | 25 |
129 589 03 21 00
Feeler gauge
L72.16-0004-01
1 Adjust installation depth of load compartment sliding door in area of C-pillar by moving lock striker .
L72.16-0005-01
2 Adjust installation depth of load compartment sliding door in upper area of door guide.
The installation depth of the load compartment sliding door can be adjusted by loosening the two bolts (arrows) and by moving the two door guide parts with a screwdriver.
L72.16-0006-01
3 Adjust installation height of load compartment sliding door with adjustment screw (arrow) below foam rubber paneling.
To adjust loosen jam nut.
L72.16-0011-01
4 The height of the sliding door can be changed slightly in the rear area by moving the guide rail (max. 5 mm).
L72.16-0007-01
5 Adjust installation depth of load compartment sliding door in the lower area with eccentrically positioned roller on lower door guide.
To adjust loosen jam nut.
L72.16-0012-01
6 Close load compartment sliding door and check ridge offset of load compartment sliding door in relation to adjusted surfaces (B) as well as gap dimension (A).