S72.12-4523-09
Shown with code E67 (8 speaker system) |
1 | Door trim | 5 | Cover | 9 | Electrical connector | ||
2 | Exit and warning lamp | 6 | Screw | 10 | Cable | ||
3 | Handle | 7 | Screw | 11 | Inside door opener | ||
4 | Cover | 8 | Retaining clips | 12 | Rear door tweeter |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove inner trim at window frame of rear door. | ||
2 | Remove exit and warning lamp (2). | If installed. | |
Clip remover | |||
3 | Pull handle (3) of inside door opener (11), unclip cover (4) at front and remove. | Extraction hook | |
4 | Unscrew screw/bolt (6). | ||
5 | Unclip cover (5) and remove. | Extraction hook | |
6 | Unscrew bolt (7). | ||
7 | Unclip door trim (1) at retaining clips (8) and remove upwards from rear door until electrical connector (arrow) can be accessed. | Long wedge | |
8 | Disconnect electrical connector (arrow). | ||
9 | Detach electrical connection (9). | Model 470, 471 | |
10 | Detach cable (10) at inside door opener (11) and remove door trim (1). | ||
11 | Install in the reverse order | ||
| Check | ||
12 | Perform function test of inside door opener (11) and of rear power window. | ||
13 | Perform function test of rear door tweeter (12). | Model 470, 471 |
115 589 03 59 00
Long wedge
140 589 02 33 00
Extraction hook
452 589 01 63 00
Clip remover