Removing and installing rear wall trim

AR68.30-W-4750C

19.11.97

MODEL 375.1 with BODY 375.830 with CODE (F07) S-cab (short)

MODEL 375.3 with BODY 375.810 with CODE (F07) S-cab (short)

MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899 with CODE (F07) S-cab (short)

MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (F07) S-cab (short)

W68.30-0018-06

1 Left stowage compartment

2 Philips screw

3 Philips screw

4 Right stowage compartment

5 Center stowage compartment

6 Philips screw

W68.30-0019-06

7 Rear wall paneling

8 Vent nozzle

9 Plastic grub screw

10 Curtain rail

11 Coat hook

12 Philips screw

13 Edge bow

14 Philips screw

15 Torx screw

16 Grab handle

17 Door seal

18 Cover

19 Cover

20 Plastic anchor

 	Removal, installation
1	Fold rear seat backrests forward and move seats completely toward front.
2	Remove side stowage compartments (1, 4).	Installation: Slide stowage compartments at entry below floor covering
3	Remove center stowage compartment (5)
4	Remove rear window		AR67.20-W-2000A
5	Remove edge bow (13)
6	Remove curtain rail (10)	 Remove rail together with anchors  Do not punch stud bolts toward inside (rattling noises while driving).
7	Remove coat hook (11)
8	Remove Torx screws (15) from grab handles (16)	 Tilt grab handles toward front.
			*BA68.70-N-1001-01A
9	Remove door seal (17) from door cutout in area of rear wall paneling
10	Remove seatbelts	Only when equipped with statically suspended seats. Remove retaining bracket from seat subconstruction	AR91.40-W-1010A
11	Remove plastic anchor (20)
12	Remove rear wall paneling (7)
13	Pull covers (18, 19) and vent nozzles (8) out of cutouts in rear wall paneling	 Only when replacing rear wall paneling
14	Install in the reverse order

 Grab handle

 Grab handle