Remove/install upper rear wall paneling

AR68.30-S-4751P

Remove/install upper rear wall paneling

29.05.2017

Model

470, 471

1

Seat belt guide bracket

2

Upper rear panel trim

3

Center C-pillar trim

4

Strap

2

Upper rear panel trim

5

Retaining clips

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove rear bench seat

AR91.12-S-4025P

2

Remove seat belt guide bracket (1) and guide seat belt strap out of upper rear panel trim (2)

AR91.40-S-0683P

 Installation:
Install seat belt strap so that it is not jammed or twisted.
Seat belt malfunctions can otherwise occur.

3

Unclip upper rear panel trim (2) from rear panel (arrows A)

 Long wedge

*115589035900

4

Unclip upper rear panel trim (2) from left and right center C-pillar trim (3) (arrows B)

 Clip remover

*452589016300

5

Carefully release upper rear panel trim (2) upward at left and right center C-pillar trim (3), unclip forward (arrow C) and remove

 Installation: Guide straps (4) forward through openings in upper rear panel trim (2).

 Clip remover

*452589016300

6

Check retaining clips (5) for damage and that they are correctly seated

If a retaining clip (5) is damaged.



Replace retaining clip (5).

If a retaining clip (5) is not correctly seated in mount on upper rear panel trim (2).



Correctly position retaining clip (5).

7

Install in the reverse order