Remove/install trim at upper side in trunk

AR68.30-P-4805MFX

Remove/install trim at upper side in trunk

09.12.2019

Model

247.6

Modification notes

29.11.2019

Release and disconnect electrical connector.

Operation step 4.

29.11.2019

Remove multimedia connection unit (A90/5).

Operation step 6.

Shown on model 247.6 except for code 847 (3rd seat row)

1

Cover

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

 

Remove/install

1

Remove luggage compartment cover.

2

Fold back rear seat.

3

Unclip trim (1).

 Installation:
Ensure that the trim (1) is inserted correctly in the adjacent trims.
Damage to adjacent trim can otherwise occur.

 Long wedge

*115589035900

4

Release and disconnect electrical connector from multimedia connection unit (A90/5).

Model 247.6
with code 847 (3rd seat row)


Do not crush or kink or subject electric lines to tension.
This will result in damage to the lines which may impair their functional capability.

5

Remove trim (1) in the bottom area toward the inside from the bottom trim and remove trim (1).

 Installation: Helper required.

6

Remove multimedia connection unit (A90/5).

Model 247.6
with code 847 (3rd seat row)
When replacing trim (1).

7

Install in the reverse order.

8

Position edge guard in the working area.