Remove/install rear center section cover

AR68.30-P-4786MFV

Remove/install rear center section cover

21.08.2019

Model

118.3, 177.1/9, 247

Shown on model 177.1

1

Rear center section paneling

2

Mounting clip

3

Load compartment floor

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

 

Remove/install

1

Remove load compartment floor (3) from load compartment.

2.1

Remove retaining clips (2).

Model 118.3, 177.1/9, 247.0

 Dismantling tool

*000589956300

2.2

Remove screws at rear-end center-section trim (1).

Model 247.6/7

3

Unclip rear-end center-section trim (1) upwards (arrows) and remove.

 Installation: Ensure that the edge guard is seated correctly in the working area.

 Long wedge

*115589035900

4

Install in the reverse order.